Intellex IP
64 Intellex® Ultra
1 For information on setting up and installing Intellex IP, see the Intellex IP Quick Setup Guide.
2 Follow the prompts and enter information as for the standard Ultra 4.1 application.
3 From the main screen, select Setup. The Setup Options screen appears.
4 Configure the IP device according to the manufacturer’s instructions before adding it to the
Intellex IP application. This includes:
Green light indicates the unit has power, but you
must press the power button to start Intellex IP
IP Sources button
replaces Cameras
button on standard
Intellex
Select to open the
IP Source Selection
dialog
To Next Page
Loading...
Need help?
General
