Ametek 3050 Series User Manual

User Interface | 4-9
To Save settings on the Setup tab, click Apply.
Veriication Tab
Use the Veriication tab to schedule routine Zero.
Verify Now Button
Click to begin veriication cycle now.
Abort Button
Click to terminate veriication or zero.
Zero Now Button
Click to begin zero cycle now.
Adjust Span After Verfy check box
Checked The analyzer performs an span adjustment at the end of
the zero cycle.
Not checked The analyzer veriies only.
Ignore Span Drift check box
Checked One time span value change is not limited.
Not checked One time span value change is limited to 10% of the
existing span value.
Set Clock
Click Set Clock to synchronize the clock within the analyzer with the PC. The Time Syn-
chronization box opens with the PC time and date and the analyzer time and date. Click
Synchronize to set the time, or click Cancel to close the box.
Figure 4-6.
Veriication tab.

Ametek 3050 Series Specifications

General

Brand	Ametek
Model	3050 Series
Category	Measuring Instruments
Language	English