Glossary Of Terms | 7-1
GLOSSARY OF TERMS
Annunciator Display A graphical representation of a panel annunciator on which
alarm status of 3050 results are displayed.
Address A decimal number that must be assigned to a Model 3050,
when the host PC is communicating with multiple Model 3050
Moisture Analyzers.
Alarm Output Relay contact, which opens to indicate a concentration alarm.
The alarm set points can be changed via the conigurator soft-
ware.
Appropriate Vent System Gas manifold designed to transport the gas exhausted from the
analyzer to a safe disposal.
Baud Rate The rate, in bits per second, at which serial communications
take place between the 3050 analyzer and the host PC.
Coniguration A set of operating parameters that has been set up using the
conigurator software for control of a single Model 3050 Mois-
ture Analyzer.
Conigurator Software A Windows-based graphical user interface that provides a
means for communicating with a single Model 3050 Moisture
Analyzer.
Contaminates Liquids, solids, or gases that cause deterioration of system per-
formance.
Contaminate Trap A small packed column designed to remove glycols and other
contaminates that may degrade the performance of the QCM
sensor.
Custom Display A display mode in which any combination of Trend, Tabular,
Meter or Annunciator displays may be combined and stored as
a display coniguration under a unique ile name. The display
coniguration may be assigned to one of three buttons on the
main tool bar, for instantaneous activation of the custom dis-
play mode.
To Next Page
Loading...
Need help?
General
