7-4 | 3050-SLR Moisture Analyzer
Trend Display A line plot of 3050 analyzer results with respect to time.
Two-Wire Mode RS-485 communication mode, in which only two wires are
used, connected to the “Send Data” and “Receive Data” termi-
nals. Simultaneous bi-directional communications are not pos-
sible using two-wire mode.
Units Speciic engineering units in which the Model 3050 moisture
results are represented. Examples are ppmv, ppmw, etc..
Veriication A check of the accuracy of the Model 3050’s results, by refer-
ence to an internally installed moisture standard. A veriica-
tion cycle may be initiated manually, or at scheduled intervals.
The analyzer’s calibration factors may be automatically adjust-
ed if the “Calibrate after verify” box is checked.
To Next Page
Loading...
