AMETEK Brookeld Page 53 Manual No. M08-372-F1116
TA-FSF FILM SUPPORT FIXTURE
This xture is used for puncture tests to measure the strength of ne lms.
Requires Fixture Base Table TA-BT-KIT.
TA-GPJ GENERAL PEELING JIG
Thisxturemeasurestheadhesivestrengthneededtoremovethelidfromasealed
container at 0˚, 45˚, and 90˚ angles. Requires Fixture Base Table TA-BT-KIT.
TA-HCF HAIR COMBABILITY TEST FIXTURE
Thisxturemeasurestheeffectofproducts,suchasshampooandconditioners,
on the combability of hair.
TA-JMPA JUNIOR MULTIPLE PROBE ASSEMBLY
This multiple probe assembly, consisting of nine 3mm probes and corresponding
base plate, is specically designed to hold nine small samples of irregular
geometry, such as peas, corn, nuts or dried fruit. Requires Fixture Base Table
TA-BT-KIT.
TA-KF KEIFFER DOUGH AND GLUTEN EXTENSIBILITY FIXTURE
Thisxturequantiesmaximumforceanddistanceneededtobreakthesample.
Requires Fixture Base Table TA-BT-KIT.
TA-KSC KRAMER SHEAR CELL
The Kramer Shear Cell follows principles of the Allo-Kramer Shear Press. Test
cell (53mm X 57mm X 56mm) has clear Perspex front for viewing test progress.
Ten shear cutting blades alternating (65mmL) are loosely suspended from blade
holder. Blade holder has quick-release mounting mechanism allowing removal
fro cleaning withour distrubing the alighnment. Requires Fixture Base Table
TA-BT-KIT.
TA-LC LIPSTICK CANTILEVER TEST FIXTURE
Thisxtureallowsimitativetestsonlipstickandsimilarproductstoquantifythe
strength of a product. Requires Fixture Base Table TA-BT-KIT.
TA-LTT LOOP TACK TESTER
This tester measures the adhesive strength of pressure sensitive tape and stickers
according to ASTM D6195. Requires Fixture Base Table TA-BT-KIT.
TA-MA MUCO ADHESION TEST FIXTURE
Thisxturequantiestabletadhesivenesstoa mucosal surface by simulating
body and temp conditions and force needed to pull tablet away from surface.
TA-MDI METER DOSE INHALER TEST FIXTURE
This xture measuresthe push-button force to actuate the inhaler. Requires
Fixture Base Table TA-BT-KIT.