Ametek BROOKFIELD CT3 User Manual

AMETEK Brookeld Page 50 Manual No. M08-372-F1116
TA52 Small Scale MOHRS Shear Blade
Includesonebladeholderandveblades.Bladesare9mmWidex35mm
Length x .5mm Thick
TA53 * 33mm D Cutting Wire Probe, 40 mm L, Connects to M6 Female Thread
A-2 Fixtures
ACCESSORIES FOR ROTARY BASE TABLE
TA-RT-KIT ROTARY BASE TABLE
Roundbasetableprovidesquickandeasyheightadjustmenttoaccommodate
various samples. Accessories listed below are mounted onto this table to
facilitate special sample holding requirements. Includes pair of T-bolts for
securing table.
ALL ACCESSORY FIXTURES BELOW MOUNT ONTO ROTARY BASE TABLE
TA-ATT ADHESIVE TACK TESTER
This tester is used for measuring stickiness of pressure sensitive adhesive
materials such as tape. Requires Rotary Base Table TA-RT-KIT.
TA-AVJ ADJUSTABLE VICE JIG
Thisxtureisusedforholdingsmalsamplesforapuncturetest. Goodfor
Jelly beans, gum drops, etc. Requires Rotary Base Table TA-RT-KIT.
TA-BEC BACK EXTRUSION CELL
The Back Extrusion Cell is used for measuring the consistency of applesauce,
pudding, yogury and similar products. It consists of 3 containers with internal
dimensionsof38.1mm diameter, 24mm deep; includesone25.4mmdiameter
probe. Requires Rotary Base Table TA-RT-KIT.
TA-JTPB JUNIOR THREE POINT BEND FIXTURE
Smallscalethreepointbendxtureforfracturetestofbrittlematerials.Probe
usedwiththisxture,TA7KnifeEdgeBlade,isincludedin General Probe
Kit TA-P-KIT2. Otherwise, please order TA7 separately. Requires Rotary Base
Table TA-RT-KIT.
TA-JPA JUNIOR PUNCH ASSEMBLY
Thisaccessoryisusedforpunchingthroughatsamples.Probeusedwiththis
assemblyy, TA10, is included in General Probe Kit TA-P-KIT2. Otherwise, order
TA10 separately. Requires Rotary Base Table TA-RT-KIT.
TA-TBLT Pair of T-bolts with nuts and washers.

Ametek BROOKFIELD CT3 Specifications

General

Brand	Ametek
Model	BROOKFIELD CT3
Category	Measuring Instruments
Language	English