Ametek BROOKFIELD CT3

AMETEK Brookeld Page 55 Manual No. M08-372-F1116
TA-RCA ROLLER CAM ACCESSORY
This accessory’s grips measure the tensile strength and tear characteristics of
materialsuchaspolymerlms.
TA-RT RAFT TESTER
The Raft Tester looks like a L-hook. It is used in the assessment of the Strength
ofAlginateRafts,usedinthetreatmentofgastro-oesophagaelreux.Theforce
required to pull the raft tester up through the raft is recorded as the raft strength
(peak Load). Requires Fixture Base Table TA-BT-KIT.
TA-SBA SET OF 4 SHEAR BLADES
Including Warner Bratzler test jig complete with slotted base. The blade set
includesfourshearblades,rmlyheldwithinaspeciallydesignedbladeholder.
The jig is utilized in the measurement of shearing and cutting forces, as the
blades pass through a sample. Requires Fixture Base Table TA-BT-KIT.
TA-SFF SPAGHETTI FLEXURE FIXTURE
Thisxtureisusedtoquantifyexurecharacteristicsofuncookedspaghettiand
other dry pastas.
TA-SFJ SLIDING FRICTION JIG
Thisxturemeasuresthecoefcientoffrictionforpackagingmaterialsaccording
to ASTM D1894. Requires Fixture Base Table TA-BT-KIT.
TA-STF SPREAD TEST FIXTURE
Thisxturequantiestheforcetospreadamaterialonasurface.TheFixture
includesonemalecone,vefemaleconesandonefemaleconeholder.Requires
Fixture Base Table TA-BT-KIT.
TA-STJ SYRINGE TESTING JIG
Thisxtureisusedformeasuringtheforcerequiredtopushorpullasyringe
plunger.  Important to pre-lled syringe market or manufacturers of custom
syringe products. Fixture designed to hold syringe barrel while pushing or
pullingsyringeplunger.Aclampingmechanismtoholdsyringebarreladjusts
to accommodate barrel up to 40mm in diameter. Requires Fixture Base Table
TA-BT-KIT.
TA-TCA TABLET COATING ADHESION FIXTURE
Thisxturemeasurestheadhesionforceofatabletcoatingtoatablet.Requires
Fixture Base Table TA-BT-KIT.
TA-TEF TUBE EXTRUSION FIXTURE
Thisxturemeasurestheforceneededtosqueezecreamorpasteoutofatube.
Requires Fixture Base Table TA-BT-KIT.
TA-TPB THREE POINT BEND TEST FIXTURE
Threepointbendtestxtureisusedforfracturetestsofbrittlematerials.Sample
supportscanbeadjustedtoprovidespacingfrom10mm-70mm.Samplesupports