123312 03 17-08-2004 3
List of contents
1.0
Introduction ..............................................................................4
2.0 Safety instructions ...................................................................6
3.0 Setting up the calibrator ........................................................11
3.1 Receipt of the calibrator.............................................................. 11
3.2 Preparing the calibrator .............................................................. 13
3.3 Choice of insertion tube .............................................................. 14
3.4 Inserting the sensor .................................................................... 16
4.0 Operating the calibrator.........................................................19
4.1 Keyboard, display and connections............................................ 19
4.2 Starting the calibrator.................................................................. 22
4.3 Selecting the set-temperature .................................................... 22
4.4 Using the SWITCH TEST ........................................................... 24
4.5 Using the AUTO STEP ............................................................... 28
4.6 Using the MENU ......................................................................... 31
4.6.1 Adjusting the temperature unit ....................................... 32
4.6.2 Adjusting the max-temperature ...................................... 33
4.6.3 Adjusting the SWITCH TEST slope rate ........................ 33
4.6.4 Adjusting the extra stability time..................................... 34
4.6.5 Adjusting the temperature resolution ............................. 34
4.7 Simulation/training ...................................................................... 35
5.0 Storing and transporting the calibrator ...............................36
6.0 Errors.......................................................................................38
7.0 Setting the main voltage and replacing the fuses..............40
7.1 Returning the calibrator for service............................................. 41
8.0 Maintenance............................................................................43
8.1 Cleaning...................................................................................... 43
8.2 Adjusting and calibrating the instrument..................................... 44
8.2.1 Adjusting the calibration date ......................................... 46
8.2.2 Calibrating/adjusting the instrument............................... 47
9.0 Technical specifications........................................................51
10.0 List of accessories .................................................................59
To Next Page
Loading...
Need help?
General
