16 17-08-2004 123312 03
3.4 Inserting the sensor
Before inserting the sensor and switching on the calibrator, please note
the following important warning:
Warning
• Never use heat transfer fluids such as silicone, oil,
paste, etc.
These fluids may penetrate the calibrator and cause
damage or create poisonous fumes.
Insert the sensor as shown in Fig. 2.
Fig. 2
In order to spare the sensor and its connections it is recommended to
use a heat protection shield (104216) at high temperatures (see Fig.
3).
C
A
L
I
B
R
A
T
I
O
N
I
N
S
T
R
U
M
E
N
T
S
To Next Page
Loading...
