30 17-08-2004 123312 03
The following will be displayed for one second to indicate that the
calibrator is ready to work towards the set-temperature:
°C
The calibrator will now work towards the given set-temperature. An
audible alarm will be emitted once the calibrator is stable.
The calibrator will wait the specified amount of extra time. The
instrument indicates this by counting down the amount of time
remaining:
°
min
The calibrator will then go to the next step. The procedure is the same
as for the first step. This process will be repeated until the last step has
been executed and the function has been completed.
To Next Page
Loading...
Need help?
General
