Ammann ARX 23-2 - Valve Clearance Check and Adjustment; Engine Cooler Cleaning

149ARX 23-2 T4i, ARX 26-2 T4i
593063
MAINTENANCE MANUAL
3.6.30 Valve clearance check and adjustment
Contact the Kubota service for adjusting the engine valves.
3.6.31 Engine cooler cleaning
The cooler fouling results in reduced cooling eect and in-
creased temperatures of the engine coolant.
Clean with compressed air or pressure water (steam). Clean in
the direction from the fan side.
When working in avery dusty environment, carry out the
cleaning daily.
Do not use cleaners with a too high pressure to avoid
damage to the cooling ns.
When the cooler is contaminated by petroleum prod-
ucts, use a cleaning agent and proceed according to
the manufacturer’s instructions! Find out the cause of
contamination!
Follow environmental standards and regulations when
cleaning the machine!
Clean the machine in aworkplace equipped with acatch-
ing system of cleaning agents to avoid contamination of
the soil and water resources!
Do not use forbidden cleaning agents!