Ammann ARX 23-2 - Stopping the Machine and Turning off the Engine; Machine Emergency Stop

73ARX 23-2 T4i, ARX 26-2 T4i
OPERATING MANUAL
2.7.3 Stopping the machine and turning o the engine
Turn o the vibration with the vibration switch (12).
Stop the machine by changing the travel control (11) to the neutral position (N).
Brake the machine by changing the travel control (11) to the brake position (P).
Set the engine speed control (3) to the idle speed.
Switch over the key in the ignition box (19) to the position “0”, take out the key from the ignition box and close the lid.
Turn o the battery disconnector when shutting down the machine.
2.7.4 Machine emergency stop
In a dangerous situation requiring the machine to immediately stop, press the emergency brake button (6).
The machine will stop moving immediately, the engine will stop working and the parking brake will be enabled.
Turning on:
Press the emergency brake button (6) to brake the machine immediately, turn o the engine and apply the parking brake.
The indicator lamps for battery charging (22), engine lubrication (23), parking brake (29) and emergency stop (26) will light up on the
display.
Turning o:
Turn the emergency brake button (6) in the direction of arrows.
The indicator lamps for battery charging (22), engine lubrication (23) and parking brake (29) will remain light up on the display.
Move the travel control (11) to the zero position (0) and the engine speed control (3) to the idle speed position; now start the engine.