Amroad DP3210 - LED Indicators

MANUAL FOR SYSTEM INTEGRATOR
8
LED Indicators
There are one 3-color LED Indicator and door bell button (green LED) on the front side of the video door phone. The following
table displays the status and their description.
Green LED Red LED Blue LED
Door Bell Button
(Green LED)
Description
OFF ON for 1 second OFF ON for 1 second
Boot is initiated.
WL LED is also On for 1 second.
Blinking (3-sec On,
one-sec Off)
OFF OFF OFF Boot procedure 1
st
stage, OS Initial
OFF ON OFF ON Boot procedure 2
nd
stage, AP Ready
ON OFF OFF OFF
Boot is completed, and the device works
normally. (SIP Mode- DHCP, Static IP, and PPPoE
connection mode)
ON OFF OFF ON
When Door Bell is pressed, or it’s at night (SIP
Mode).
OFF OFF ON OFF
Boot is completed. Device works normally.
(Peer-to-Peer Mode)
OFF OFF ON ON
Door Bell is pressed, or it’s at night
(Peer-to-peer Mode).
Blinking (Green->,
Red->, Blue-> each
one-sec On)
Blinking (Green->,
Red->, Blue-> each
one-sec On)
Blinking (Green->,
Red->, Blue-> each
one-sec On)
OFF Firmware Upgrade
OFF OFF On 3 seconds Once OFF Reset! Device becomes Static IP mode.