DP3210 VIDEO DOOR PHONE
29
Disable in the dropdown menu. And, fill in each other’s IP address.
IP Address You may fill in the IP address of SIP Proxy Server in this field.
SIP Registrar Server
ITEM Description
IP Address You may fill in the IP address of SIP Registrar Server here.
Registration
Expire Time
Set the time for SIP registration authorization
The default is 3600 seconds.
Protocol You may select network communication protocol of the SIP service here. There are 2
options: UDP and TCP.
NOTE: Default setting is UDP protocol.
Session Timer
(0~1800)
You can set the session timer here. The range is from 0 to 1800 seconds.
Default is 0 second.
Media Timer
(0~180)
This setting allows your phone to force release automatically a conversational call when
your phone doesn't receive any media packets from the remote side during a period of time.
If you want to disable this feature, please fill in "0" sec.
No Answer Timer When visitor presses the door bell and no one answer the call, the bell sounds (Ding-Dong)
will continuously ring for a time period. You may select the time period- 15sec, 30sec, 45sec,
or 60sec. Default is 15 seconds.
NOTE: The setting is based on your IP PBX.
Incoming Allow
List Service
White List1 ~ White List5 – There are five fields for user filling in phone number(s) that are
allowed to call in.
NOTE: If none of the five White Lists is filled out, it means all phone number(s) can call in.
To Next Page
Loading...
