MANUAL FOR SYSTEM INTEGRATOR
32
stolen
Service You may enable or disable the function of “Alarm will be triggered while being stolen”.
Time for Alert Select Always/3 min for the alarm sound time period when the alarm is triggered.
Notice Number via
Message (SIP)
You may fill in the Video phone number here, it will inform the Video Phone when the
internal alarm is triggered.
Notice ICMS IP Fill in IP address of ICMS (Intelligent Community Management Server).
If the alarm is triggered, the message will be sent to ICMS.
Notice ICMS Port Fill in port number of ICMS (Intelligent Community Management Server).
If the alarm is triggered, the message will be sent to ICMS. Default is 8090.
Email Setting
Trigger By No Answer You can enable/disable the “No Answer” as a trigger point for sending Email for
notification.
SMTP server Host name or IP address of the SMTP server for notification. e.g. smtp.gmail.com
SMTP port To specify the port of the SMTP server. If the field is empty, the default value is 25. The
“smtp.gmail.com” port is 587.
SMTP server Account
Input SMTP server Account.
NOTE: Just enter the local-part of the email address (ex, John123), and you don’t need to
enter the domain name (ex, @gmail.com)
SMTP server
Password
Input SMTP server Password.
TLS Set enable/disable for mail transmission that “Confirms Client to the Server identity”
action is needed or not. TLS (Transport Layer Security) is a network protocol that ensures
privacy between email servers on communicating applications.
To Next Page
Loading...
