AmScope ME580 Series - Preparing a Slide (Continued)

18
ME580 Series
User’s Manual
Operaon
3. Place the cover slip at an approximately 45 degree angle to the slide with one edge touching the water drop.
Gently let the cover slip go, which will cause it to fall onto the specimen and sele at. If too much water or too
large of a sample is used, you may use a so, lint free opcal cloth or kimwipe to cover your nger and gently
press it at, or start over with a new, thinner sample, or less water.
4. Your slide is now ready to be placed on the microscope stage for viewing, or you can connue to the nex sec-
on to learn how to stain your sample, if needed.
Preparing a Slide (Connued)