Table of Contents
i
AXB-TPI/3 Touch Panel Interface 3
Table of Contents
Product Information .................................................................................................1
Specifications .................................................................................................................... 2
Installation .................................................................................................................5
Installing the Input Modules............................................................................................... 5
Removing Input Modules................................................................................................... 5
Mounting the TPI/3 in an Equipment Rack........................................................................ 6
Other Mounting Options .................................................................................................... 7
Wiring the AXB-TPI/3 ........................................................................................................ 7
Wiring guidelines...................................................................................................................... 7
Preparing captive wires............................................................................................................ 8
Using the AXlink connector for data and power ....................................................................... 8
Using the (DB-9) RS-232 connector for mouse control or data ............................................... 9
Using the VGA IN DB-15 (male) high-density connector ......................................................... 9
TPI Configuration and Usage ................................................................................11
Setting Up Serial Communication from PC to the TPI/3.................................................. 11
Setting Up serial procedures.................................................................................................. 11
Using AXCESSX for serial communication ............................................................................ 11
Using HyperTerminal for serial communication ..................................................................... 13
Setting up Touch Devices and Drivers ............................................................................ 14
Setting the Output Resolution ................................................................................................ 14
Assigning a touch device ....................................................................................................... 15
Calibrating the Monitor ........................................................................................................... 16
Verifying your settings............................................................................................................ 16
Setting Up AXlink Communication from Master to the TPI/3........................................... 17
Setting Up AXlink procedures ................................................................................................ 17
Using AXCESSX for AXlink communication .......................................................................... 17
Using HyperTerminal for AXlink communication.................................................................... 17
Setting up the touch device through AXlink ........................................................................... 18
Setting Up NetLinx Communication from PC to the TPI/3............................................... 19
Using NetLinx Studio for communication via an Ethernet connection.................................... 19
Using NetLinx Studio for communication via an COM Port.................................................... 20
Stacking the TPI/3 ........................................................................................................... 21
Using a CG10 LCD Touch Panel with the AXB-TPI/3 ..................................................... 24
To Next Page
