AMX AXB-TPI/3 User Manual

Programming
40
AXB-TPI/3 Touch Panel Interface 3
System Send_Commands (Cont.)
AKEYP
Pop up the
keypad icon and
initialize the text
string to that
specified.
The keypad string is set to null on power up and is stored until power is lost.
Syntax:
"'AKEYP-<number string>'"
Variables:
number string = 0 - 9999.
Example:
SEND COMMAND Panel,"'AKEP-12345'"
Pops up the Keypad and initializes the text string '12345'.
AKEYR
Remove the
Keyboard/
Keypad.
Remove keyboard or keypad that was displayed using 'AKEYB', 'AKEYP', or 'PKEYP'
commands.
Syntax:
"'AKEYR'"
Example:
SEND COMMAND Panel,"'AKEYR'"
Removes the Keyboard/Keypad.
BAUD
Set the program
port baud rate.
The baud rate can also be set in the Protected Setup page’s BAUD level indicator.
Syntax:
"'BAUD <baud rate>'"
Variable:
baud rate = 38400, 19200, 9600, 4800, 2400, 1200, 600, and 300.
Example:
SEND COMMAND Panel,"'BAUD 38400'"
Sets the Baud rate to 38400.
BEEP
Output a beep.
Syntax:
"'BEEP'"
Example:
SEND COMMAND Panel,"'BEEP'"
Outputs a beep.
CALIBRATE
Start the touch
panel calibration
sequence.
Syntax:
"'CALIBRATE'"
Example:
SEND COMMAND Panel,"'CALIBRATE'"
Starts the calibration operation on the touch panel.
CLOCK
Set the time and
date oin the panel.
Syntax:
"'CLOCK <mm-dd-yy> <hh:mm:ss>'"
Variables:
mm = 01 - 12, dd = 01 - 31, yy = 00 - 99.
hh = 00 - 23, mm = 00 - 59, ss = 00 - 59.
Example:
SEND COMMAND Panel,"'CLOCK 02-08-98 19:16:00'"
Sets the touch panel’s date to February 8, 1998, and time to 7:16 p.m.

AMX AXB-TPI/3 Specifications

General

Brand	AMX
Model	AXB-TPI/3
Category	Recording Equipment
Language	English