AMX MST-1001 User Manual

Installing Wall-Mount (MXD) Panels
29
Modero S Series G4 Touch Panels Instruction Manual
Removing the Backbox
S Series touch panels are shipped pre-installed in a plastic Backbox. This Backbox must be detached from the panel
before installation.
Wall-mount S Series touch panels are held in place to the Backbox via latch hooks and clips on the Backbox (FIG. 21).
The clips that lock down the panel’s edges must be unlatched in order to remove the touch panel from the Backbox.
Detaching the MSD-1001-L Backbox
1. Orient the panel so that the panel/Backbox assembly is upside-down, and the glass is facing away from you. The
bottom of the Backbox should be facing up.
2. On the bottom of the Backbox, press down on the front corners of the plastic (on the side nearest to the glass) to flex
it enough to unhinge the panel.
Note that at this point, the top edge of the panel is still latched into the top of the Backbox.
3. Rotate the top of the Backbox away from the top of the panel and carefully lift it away. Be careful not to pull on the
cables or connectors.
Also, after installation there are circumstances (such as firmware updates or other
maintenance) that will require accessing the device’s Micro-USB ports. In these
cases, the panel may need to be removed from the Backbox.
Read the following instructions and be careful when removing the touch panel from
it’s Backbox. Improper handling or excessive force can result in damage to the
panel’s glass touch surface.
FIG. 15 S Series Backboxes
MSD-701-L
MSD-431-L
Press down with thumbs to release
Rotate Backbox back
and lift off of panel
Press down with
thumbs to release
Rotate Backbox back
and lift off of panel
Press down with thumbs to release
MSD-1001-L
Rotate Backbox back
and lift off of panel
TOP
The panels in this illustration are
shown upside-down. This orientation
makes it easy to press down on the
plastic Backbox to disengage the
latches that secure the bottom of the
panel to the bottom of the Backbox.

AMX MST-1001 Specifications

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	10 \
Touchscreen type	Tabletop
Display brightness	350 cd/m²
Display resolution	1280 x 800 pixels
Display technology	LED
Touchscreen technology	Resistive
Viewable size diagonal	256 mm
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Product color	Black
Ethernet LAN (RJ-45) ports	1
Display viewable area (HxV)	136 x 217 mm
Power supply type	DC
Power consumption (standby)	4.5 W
Power consumption (typical)	7.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Wall mountable	No
HDMI ports quantity	0
Graphics card	AMX G4
Internal memory	512 MB
Internal memory type	DDR
RMS rated power	1.5 W

Weight and Dimensions

Depth (without stand)	103 mm
Width (without stand)	264 mm
Height (without stand)	157 mm
Weight (without stand)	5530 g