To Next Page

To Previous Page

Installing Wall-Mount (MXD) Panels

Modero S Series G4 Touch Panels Instruction Manual

Installation

S Series touch panels may be installed directly into a solid surface environment, using either solid surface screws or the

included locking tabs for different mounting options. Once installed, the panel is contained within a clear outer housing

known as the Backbox (FIG. 16).

This Backbox is removed to install the device into a wall or when using the optional Rough-In Box accessory. Refer to

Removing the Backbox on page 29 for Backbox removal.

Refer to A Note About Wall and Rack Installation on page 27 for important notes

on thermal concerns with Wall and Rack Installations.

FIG. 16 S Series Backboxes - Locking Tabs

Locking tabs

Locking tab

MXD-1001-L

MXD-701-L

MXD-431-L

For typical mounting surfaces, such as drywall, use the locking tabs as the primary

method for securing the Backbox to the surface. For thin walls or solid surfaces, use

mounting screws (not included).

Other manuals for AMX MST-1001

Questions and Answers:

Need help?

Do you have a question about the AMX MST-1001 and is the answer not in the manual?

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	10 \
Touchscreen type	Tabletop
Display brightness	350 cd/m²
Display resolution	1280 x 800 pixels
Display technology	LED
Touchscreen technology	Resistive
Viewable size diagonal	256 mm
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Product color	Black
Ethernet LAN (RJ-45) ports	1
Display viewable area (HxV)	136 x 217 mm
Power supply type	DC
Power consumption (standby)	4.5 W
Power consumption (typical)	7.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Wall mountable	No
HDMI ports quantity	0
Graphics card	AMX G4
Internal memory	512 MB
Internal memory type	DDR
RMS rated power	1.5 W