AMX SC-N8012 User Manual

Appendix D: N-Command Failover Configuration
60
N-Command User Manual
FIG. 58 Assign Master and Slave
Figure 59
shows some possible status messages once master/slave configuration is successful.
FIG. 59 Status Messages
The screen below displays when logged into the slave’s 3
rd
IP address and the
slave has not taken over.
The screen below displays when logged into the slave’s 3
rd
IP address (or the
master’s IP address) after the slave has taken over.

AMX SC-N8012 Specifications

General

Brand	AMX
Model	SC-N8012
Category	Controller
Language	English