What to do if Analyticon Combi Scan 100 Measuring Instruments shows 'Printer out of paper'?
If the Analyticon Measuring Instruments indicates 'Printer out of paper', refill the printer and try printing again.
What to do if Analyticon Measuring Instruments says 'No strip'?
If the Analyticon Measuring Instruments displays a 'No strip' message, place a strip on the strip holder before pressing the start button!
What to do if Analyticon Measuring Instruments displays 'Worklist full'?
If the Analyticon Measuring Instruments displays 'Worklist full', it means there are more than 20 data entries in the received worklist. Remove the records above 20 from the transfer list and try downloading again.
How to fix 'Tray error' on Analyticon Measuring Instruments?
A 'Tray error' on the Analyticon Measuring Instruments may occur if the tray is missing or its movement is blocked. Check the tray and restart the reader.
What to do if Analyticon Combi Scan 100 Measuring Instruments displays 'Calibration error'?
If the Analyticon Measuring Instruments shows a 'Calibration error', it could be due to a problem with the calibration pad on the strip holder tray. Clean the pad or use a new strip holder tray and restart the reader.
How to resolve 'Codekey error' on Analyticon Combi Scan 100?
A 'Codekey error' on the Analyticon Measuring Instruments indicates that the codekey plug is either missing or incorrectly connected. Check if the plug is connected properly, then restart the reader.
What to do if Analyticon Combi Scan 100 Measuring Instruments displays 'Worklist frame error'?
If the Analyticon Measuring Instruments displays a 'Worklist frame error', it indicates an issue with the received worklist from the PC. Check the communication cable or the communication settings.
How to fix 'Netware error' on Analyticon Combi Scan 100?
A 'Netware error' on the Analyticon Measuring Instruments suggests a problem in bidirectional serial port communication. Check the communication cable or the communication settings.
General| Data Storage | 2000 results |
|---|---|
| Display | LCD |
| Throughput | Up to 120 tests per hour |
| Interfaces | RS232, USB |
| Power Supply | 100-240V AC, 50/60Hz |
| Weight | 2.5 kg |
| Measurement Principle | Reflectance photometry |
| Measurement Range | Varies by parameter |
To Next Page
