4.5.3.1. Memory data transfer
By this option the stored data can be printed or send to a host (see section 4.5. Data
download). In both cases you can select a range of stored data to be transferred. Enter the
MENU/MEMORY/TRANSFER submenu and follow the steps below to transfer data:
Use the control keys to select the first and the last item of the row to be transferred.
You can use the numeric keypad or external keyboard as well for entering the desired
items.
If you confirm the first item with the “OK” control key the curser automatically moves
to the next position where you have to enter the last item of the memory range to be
transferred.
After confirming the last item you automatically reach the next submenu, where you
can select the device to which you would like to send the data. By pressing the PRINT
control key, the selected memory range will be printed out. It will be send to a host if
you press the SEND control key. Sending the data require few seconds only.
After transmission has been done the display returns to MAIN MENU. You can always
leave the memory transfer option when pressing the QUIT function key.
4.5.3.2. Clearing data from memory
By using this option you can delete stored data. At first you have to select the desired
range. Enter the MENU/MEMORY/CLEAR submenu and follow the steps below:
Use the control keys to select the first and the last item of the row to be transferred.
You can use the in-build keypad or external keyboard as well for entering the desired
items.
2004/08/09 19:19:26
MENU/MEMORY
TRANSFER CLEAR
TRANSFER REPORTS
036 1234567890123
040 2004/08/11
OK
TRANSFER REPORTS
036 4110100135674
040 2004/08/11
OK
CLEAR MEMORY
036 4110100135674
040 2004/08/11
OK
TRANSFER IN PROGRESS...
REPORT: 5
CANCEL
TRANSFER COMPLETE!
MEMORY CLEAR...
CLEAR MEMORY
036
040
OK BACK
CLEAR MEMORY
036 1234567890123
040 2004/08/11
OK
TRANSFER REPORTS
036
040
PRINT SEND BACK
To Next Page
Loading...
Need help?
General
