Contents
Contents
1 Introduction .....................................................................5
1.1 Safety notes .....................................................................................................6
1.2 Care of accessories..........................................................................................7
1.3 Basics of SPECORD alignment........................................................................7
1.3.1 Sample compartment of SPECORD
®
...............................................................7
1.3.2 Adjustment of zeroth order...............................................................................8
1.3.3 Changing the position of the carrying rails .......................................................8
2 Universal holder ............................................................11
2.1 Description and use........................................................................................11
2.2 Description .....................................................................................................11
2.3 Using the universal holder..............................................................................12
3 100 mm cylindrical cell (absorption tube)...................13
3.1 Description and use........................................................................................13
3.2 Description .....................................................................................................13
3.3 Inserting the 100mm cylindrical cell................................................................13
3.4 Care and transportation of cylindrical cell.......................................................14
4 Solid sample holder ......................................................15
4.1 Description and use........................................................................................15
4.2 Using the holder and inserting the sample .....................................................15
5 Holder for cylindrical cells............................................17
5.1 Description and use........................................................................................17
5.2 Description .....................................................................................................17
5.3 Using the holder for cylindrical cells...............................................................17
6 Holder for round cells...................................................19
6.1 Description and use........................................................................................19
6.2 Description .....................................................................................................19
6.3 Using the holder for round cells......................................................................19
7 Holder for semi-microcells and microcells .................21
7.1 Description and use........................................................................................21
7.2 Holder for semi-microcells..............................................................................21
7.3 Adjustable holder for microcells, non-thermostatted, (8.5 mm / 15 mm beam
height)
............................................................................................................22
7.4 Adjustable holder for microcells, non-thermostatted (8.5 mm beam height)...23
8 Thermostatted cell holder.............................................25
8.1 Description and use........................................................................................25
8.2 Description .....................................................................................................25
8.3 Using the thermostatted cell holder................................................................25
8.3.1 Connection and installation in sample compartment ......................................25
User’s Manual SPECORD
®
200/205/210/250 – Accessories 07/2005 1
Analytik Jena AG