Voice
Control the voice and audio alert volume here.
Voice recorded alerts
Controls the voice recorded alerts such as 'Visitor / Temperature
Reading / Pass'.
Drag the red dot on the bar to adjust the volume level.
To mute or disable all voice alerts on the device, click on the
icon.
The icon will change to when muted/disabled. Click it again to unmute or enable voice alerts.
Sound alerts
Controls the sound alerts (alarm sounds when temperature is high etc.).
Click on the drop down arrow to change the volume level.
To mute or disable all sound alerts on the device, click on the icon.
The icon will change to when muted/disabled. Click it again to unmute or re-enable sound
alerts.
After making changes, click to save the settings.
Note: The Temperature Calibration alarm sound is controlled under Advanced Settings > Test Delay
22
To Next Page
Loading...
