ES
FR
DE
GB
IT
C13148123_GB.fIDM
English
-
37
-
Use and installation manual
10–Press the "emergency rinse cycle" button and
wait for the cleaning cycle to end. >>>
11–Press the button to return to the previous page.
>>>
To start a cooking cycle (in manual or programmed
mode), proceed as follows.
1–Switch on the appliance (see page 9).
2–Select the cooking type and set all the parameters
necessary for correct operation (see page 18).
3–Press the button. >>>
If the page appears on the display,
the preheating function is on. Wait
for the preheating stage to be com-
pleted before placing the foods in-
side the cooking chamber.
At the end of the preheating stage,
the display will show page. >>>
COOKING CYCLE START AND END PROCEDURE
Time
IDM-39617715400.tif
Cooking chamber temperature
Preheating temperature
To Next Page
Loading...
Need help?
General