EasyManua.ls Logo

anko VC-9790 - Page 18

anko VC-9790
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 18 of 23
If washing, wash the filter in warm mild soapy water, rinse in clean fresh
cold water and let it completely dry.
DO NOT scrub the filter or place in a dishwasher.
DO NOT use a hair drier to dry the filter.
NOTE: Never use the vacuum cleaner with wet or damp filters. Using wet
or damp filters will damage the filters, may cause serious damage to the
vacuum cleaner and will void your warranty.
At the same time the filter has been removed for cleaning (or replacing),
the dust separator can also be cleaned using warm mild soapy water,
rinse in clean fresh cold water and let completely dry
To refit the filter, place the filter into the top of the dust separator and push
it down firmly.
Refit the Dust Separator back into the Dust Canister ensuring the
Locating Lug on the side of the Dust Separator is aligned with the mating
notch in the Dust Canister as shown, and then push in all the way.

Related product manuals