MN469xC Series Multiport Test Set MM PN: 10410-00730 Rev. D A-1
Appendix A — Test Records
A-1 Introduction
This appendix provides test records that can be used to record the performance of MN469xC in conjunction
with a 2-Port VectorStar VNA.
Make a copy of the following Test Record pages and document the measured values each time performance
verification is performed. Continuing to document this process each performance verification session provides
a detailed history of the instrument’s performance.
The following test record forms are available:
• “MN4694C Multiport VNA System Test Record” on page A-2
• Table A-1, “Directivity Record for MN4694C Multiport VNA System” on page A-2
• Table A-2, “Test Port Match Record for MN4694C Multiport VNA System” on page A-3
• “MN4697C Multiport VNA System Test Record” on page A-4
• Table A-3, “Directivity Record for MN4697C Multiport VNA System” on page A-4
• Table A-4, “Test Port Match Record for MN4697C Multiport VNA System” on page A-5
Note
As the MN469xC Series Test Set provides multiple test port capabilities for the Anritsu
VectorStar MS464xA/B Series Vector Network Analyzer, they do not have any performance
specifications separate from the VectorStar VNA. Therefore, MN469xC Test Set must be
verified with a 2-port VectorStar VNA as a system. The frequency range that can be verified will
be limited by the 2-port VectorStar VNA.
To Next Page
Loading...
Need help?
General
