Chapter 4 Turn On The Power!
1. Turn on the power.
Ok, all cables have been properly connected. Are you getting confident of assembling a
computer by yourself? The final stage is to turn on the power to check what you have done so
far. Now take a short break and have a drink. Then turn on the computer to see how things are
going.
2. Set BIOS (Basic Input/Output System).
Not long after activating the power, you'll see the following screen. Please press Delete button
to get into BIOS. If you would like to see the POST screen, you may just press Tab button.
Cha
ter 4 Turn On The Power!
Phoenix-AwardBIOS BIOS v6.00PG, An Energy Star Ally
Copyright (C) 2003, Phoenix Technologies, LTD.
L210 R0.05 July.16.2003 AOpen Inc.
Main Processor : AMD Ahtlon(tm) XP 3000+
Memory Testing : 491520K OK + 32M Shared Memory
DDR Dual Channel Enabled
Default / Setting Default / Setting
CPU 100MHz / 166MHz 1.650V / 1.650V
DRAM 333MHz / 333MHz AUTO / AUTO
AGP 66.67MHz / 66.67MHz 1.53V / 1.53V
PCI 33.33MHz / 33.33MHz 3.30V / 3.30V
Primary Master : ST30641A 3.01
Primary Slave : None
Secondary Master : None
Secondary Slave : AOpen CD-RW CRW1232PRO 1.2G
Press DEL to enter SETUP, ESC to skip memory test
07/16/2003-nVidia-nForce-6A61BABAC-00
27
To Next Page
Loading...
Need help?
General
