RAID Driver Installation Guide for UX661 Series
By the strength of SiS 964 chip, UX661 provides RAID 0 and 1 functions. User could build RAID
in Windows 2000 or Windows XP. For enabling RAID function, it’s needed to install driver from Floppy
drive. Please connect Floppy drive to motherboard before starting to install OS. Of course, user needs
to install two Serial ATA hard disks to motherboard too.
1. First start OS installation, and then press <F6> while you are presented with the sentence
<Press F6 if you want to install a third party SCSI or RAID driver…>.
2. Press <S> when “Windows Setup” is generated. Then insert SiS 964 RAID driver diskette into
Floppy and press <Enter>.
33
To Next Page
Loading...
Need help?
General
