APT 8520 User Manual

© Ikonix USA
3
Safety Agency Listing - A safety mark given to a product that has met stringent benchmarks as classied by the autho-
rized agency.
Steady State Current - A term used to describe the current when the load is running nominally after the inrush current.
Switching Power Source - A power source that uses switching technology (integrated circuits and components) in
order to generate the AC voltage, current, frequency, and power.
Total Harmonic Distortion (THD) - A percentage that is used to identify the degree of the noise/unclean signal in a
power source’s output waveform.
Voltage - The amount of force that is needed to move current from point to point. Measured in volts.
1.3 Safety Symbols
1.3.1 Product Marking Symbols
Product will be marked with this symbol when it is necessary to refer to the
operation and service manual in order to prevent injury or equipment damage.
Product will be marked with this symbol when hazardous voltages may be present.
Product will be marked with this symbol at connections that require earth
grounding.

APT 8520 Specifications

General

Brand	APT
Model	8520
Category	AC Power Distribution
Language	English