© Ikonix USA
4
1.3.2 Caution and Warning Symbols
Calls attention to a procedure, practice, or condition that could possibly cause bodily
injury or death.
Calls attention to a procedure, practice, or condition that could possibly cause
damage to equipment or permanent loss of data.
1.4 Safety Precautions
This product and its related documentation must be reviewed for familiarization with safety markings and
instructions before operation. Before applying power, verify that the instrument is set to the correct line
voltage and the correct fuse is installed.
Calls attention to a procedure, practice, or condition that could possibly cause bodily
injury or death.
1.5 Service and Maintenance
User Service
To prevent electric shock do not remove the instrument cover. There are no user serviceable parts inside.
Routine maintenance or cleaning of internal parts is not necessary. Any external cleaning should be done
with a clean dry or slightly damp cloth. Avoid the use of cleaning agents or chemicals to prevent any
foreign liquid from entering the cabinet through ventilation holes or damaging controls and switches, also
some chemicals may damage plastic parts or lettering. Any replacement cables and high voltage
components should be acquired directly from APT or its distributors.
Service Interval
The instrument must be returned at least once a year to an APT authorized service center for calibration
and inspection of safety related components. APT will not be held liable for injuries suered if the
instrument is not properly maintained and safety checked annually.
User Modications
Unauthorized user modications will void your warranty. APT will not be responsible for any injuries
sustained due to unauthorized equipment modications or use of parts not specied by APT. Instruments
returned to APT with unsafe modications will be returned to their original operating condition at the
customer’s expense.
To Next Page
Loading...
Need help?
General
