TEMPERATURE FEEDBACK DISPLAY*
Adjusting the temperature
42
35
42
Warming
Cooling
35
From the Home screen you
can adjust the temperature
at any time, before or during
showering, by turning the
Q
TM
bezel.
TIP: This is your Home screen.
When in any of the Menu or Settings
screens, you can easily return to
the home screen by turning the
temperature bezel.
Turn clockwise to increase the
temperature. While the temperature
is adjusting the screen will flash and
the display will show Warming. When
the desired temperature is reached,
the display will stop flashing.
Turn anti-clockwise to decrease the
temperature. While the temperature
is adjusting the screen will flash and
the display will show Cooling. When
the desired temperature is reached,
the display will stop flashing.
6
Flow
MAX
Flow
39
FLOW FEEDBACK DISPLAY
The size of the icon and the setting number will change as the flow is
adjusted. After adjusting the flow, the display will return to the
temperature Home screen after a few seconds.
From the Home screen you
can adjust the flow during
showering, by moving the
Q
TM
lever left or right.*
* Flow can not be adjusted when in Bathfill, My Q
TM
or Settings modes, or when water is o
* Very small changes in temperature may not result in Warming or Cooling messages
showing, only the temperature value will change.
Adjusting the flow
7 8
To Next Page
Loading...
Need help?
General
