Aqualisa Q - Appendices; Appendix 1: My Q; Appendix 2: Factory Settings; Caring for Your Shower

Caring for your shower
Over time, your shower may be aected
by hard water scaling. To keep your shower
working eectively, we recommend that
you clean your shower regularly.
Your shower system should be cleaned
using only a soft cloth and washing up
liquid. Do not use abrasive cleaners.
Temp Flow Outlet* Timer Extra features
(ºC) (mins)
Family 38 4 7 Water o at end
of timer enabled
Sport 40 Max
8
Eco** 37 3
5 Water save enabled
Warm up enabled
Comfort 39 5
O Q
TM
EDITION only
Refresh 37 Max
12
Q
TM
EDITION only
Drench 42 Max
15
Q
TM
EDITION only
Appendix 1: My Q
TM
Experiences
* Dependent on the product and outlet/s installed. The icon displayed may not correspond
to the outlet in use.
** Not for use with combination boiler water systems.
*** Q™ Edition only
These are factory set Experiences and the settings cannot be changed.
Warm Up Mode*** OFF
Auto Wake Up ON
Water Save OFF
Auto Repeat Shower OFF
Auto Save Shower ON
Run Both Outlets At Warm Up OFF
Water O At End Of Timer OFF
Appendix 2: Factory settings
APPENDICES
CLEANING THE SHOWER HEAD
To reduce the need for chemical
descaling in hard water areas, your
shower head incorporates rub clean
jets, whereby any scale build up can be
broken down by gently rubbing the
flexible tips of the jets during use.
This procedure should be completed
regularly, as often as once a week in some
hard water areas, as scale build up can aect
the spray pattern and cause the shower to
perform poorly. Failure to descale the shower
head can aect the internal seals and may aect
the warranty. Cleaning and maintenance should not
be undertaken by children without supervision by a
person responsible for their safety.
Should chemical descaling of the head become
necessary, remove the shower head fully and immerse
in a mild proprietary descalent.
23 24