Aqualisa Q Installation Guide

WATER OFF AT END OF TIMER
When the timer reaches zero, you can opt to
have the water automatically shut down. This
feature can be selected in Settings. (See page
17). If this setting is not activated the shower
will continue until you touch the power symbol
and push the Q™ lever to switch o. This is a
global setting.
Water o at
end of timer
09:00 OK
08:00
Timing your shower
From within menus, move the
Q™ lever left or right until the
Timer screen appears.
Push the Q™ lever to enter.
SETTING THE TIMER
The timer can be adjusted in
one minute increments, from a
minimum of one minute to a
maximum of 20 minutes. Push
the Q
TM
lever to select.
The chosen time will apply to
the next, or current shower.
The following shower will
revert to Timer o.
Warm up mode
ON OFF
Auto
wake up
Auto repeat
shower
ON OFF
EDITING A SETTING
To change a setting, push the Q
TM
lever. Move the Q
TM
lever left or right to
choose your preference, (the active setting is in darker type) and push the
Q
TM
lever to confirm. A tick will briefly appear to confirm your choice.
Settings
Q
TM
features many optional
settings to enhance your shower.
These settings will apply to all
your showers*.
To enter Settings, from within
menus, move the Q™ lever left
or right until the Settings screen
appears.
Push the Q™ lever to enter.
*Family and Eco Experiences will override some of the settings.
Water save
Warm up mode
ON OFF
Warm up mode
Warm up mode
ON OFF
BROWSING THE SETTINGS MENU
When in the Settings menu, move the Q
TM
lever left or right to browse.
To apply Timer to more than one shower, you can create a
My Q™ profile (page 13) or enable Auto repeat shower (page 18).
15 16

Aqualisa Q Specifications

General

Brand	Aqualisa
Model	Q
Category	Controller
Language	English