Aqualisa Q Installation Guide

Push and hold for
over 3 seconds
Release lever when
desired outlet appears
Drench
Shower
Bath
Selecting your outlet Divert models only Menus
From the Home screen, you can
alternate between outlets by pushing
and holding the Q
TM
lever for over
3 seconds and releasing when the
desired icon appears. This can be
done upon starting the shower,
or during showering.
OUTLET ICONS
By default your
Q
TM
controller will
show the Shower icon
as the primary outlet
and the Drench icon as
secondary. To change,
go to Settings menu,
Configure Outlets
(page 19).
SELECTING BATHFILL
If you have a Q
TM
shower with a bathfill, the
Q
TM
controller can oer specific bath functionality.
See pages 14 and 19 for more information.
HOME*
SETTINGS
TIMER
MY Q
TM
During showering: push the Q
TM
lever to enter menus. Then move the
Q
TM
lever left or right to browse menus. Push the Q
TM
lever to select a menu.
Before showering: simply move the Q
TM
lever left or right to browse
menus. Push the Q
TM
lever to select a menu.
* To return to the Home screen from within any menu select the Home icon.
9 10

Aqualisa Q Specifications

General

Brand	Aqualisa
Model	Q
Category	Controller
Language	English