1-20
Table 1.6 - Itemized Front Panel Description (continued)
(See Figure 1.2)
____________________________________________________________________________
FIG. 1.2
Row, Col. KEYS FUNCTION
____________________________________________________________________________
D5 DEGREE/ENTER Selects the units of degrees if Phase was previously selected. All
numbers without units must be entered using the
DEGREE/ENTER key. Changing the GPIB address on startup is
an example of a number without unit that may be entered.
D6 MODIFY DOWN
(DOWN arrow)
Decreases the displayed value. The value will continue to
decrease if the key is held down. Continuing to press the DOWN
ARROW key and depressing the NORMAL key or UP ARROW
will increase the rate of modification.
To Next Page
Loading...
