Arbiter Systems 1040C User Manual

2-12
Table 2.2 - Power Factor\Phase Operating Procedure (continued)
______________________________________________________________________________
STEP OPERATOR ACTION RESULTS
______________________________________________________________________________
18. Press POWER
FACTOR, PHASE,
POWER/VARS,
FREQUENCY,
VOLTAGE or
CURRENT
New values for any of these functions may be entered using the
keypad or the old settings may be modified. The PMC will
remain in Operate mode unless the new Voltage or Current
settings entered are outside of the present operating range.
19. Press STBY The STBY LED will turn on, and OPER LED will turn off. No
output signals will be present at the output terminals.

Arbiter Systems 1040C Specifications

General

Brand	Arbiter Systems
Model	1040C
Category	Test Equipment
Language	English