4
Notice - Warnings
Save this manual for future reference. To use this product better and more safely, please read this manual carefully
before installation
and initial operation.
This heat pump must be installed by qualified and experienced technicians/trades-persons. Improper
Installation of this heat pump may cause damage and danger.
This heat pump must be installed in accordance with local wiring regulations including an isolating switch from the
supply mains and grounded power supply consistent with the power specification of this
heat pump.
The installation of this heat pump must comply with the model's wiring chart in this manual and its power
requirements as stated on the rating label on the side of the heat pump.
Do not install this heat pump close to flammable or explosive materials, or open flames.
Checking and cleaning of the evaporator fin coil regularly is recommended for good and efficient air flow.
To Next Page
Loading...