6. TECHNICAL SPECIFICATIONS
Protective fuse rating
The recommended maximum rating of the external protective fuse for this equipment
is 16A, Red Spot type or equivalent, unless otherwise stated in the technical data
section of the product documentation.
Insulation class: IEC 601010-1 : 1990/A2 : 1995
Class I
EN 61010-1 : 1993/A2 : 1995
Class I
This equipment requires a
protective (safety) earth
connection to ensure user
safety.
Insulation
Category
(Overvoltage):
IEC 601010-1 : 1990/A2 : 1995
Category III
EN 61010-1 : 1993/A2 : 1995
Category III
Distribution level, fixed
installation. Equipment in this
category is qualification tested
at 5kV peak, 1.2/50µs,
500Ω, 0.5J, between all supply
circuits and earth and also
between independent circuits.
Environment: IEC 601010-1 : 1990/A2 : 1995
Pollution degree 2
EN 61010-1 : 1993/A2 : 1995
Pollution degree 2
Compliance is demonstrated
by reference to generic safety
standards.
Product Safety: 72/23/EEC
EN 61010-1 : 1993/A2 : 1995
EN 60950 : 1992/A11 : 1997
Compliance with the European
Commission Law Voltage
Directive.
Compliance is demonstrated
by reference to generic safety
standards.
To Next Page
