Argox X-2300 - Page 43

43
selected, printer
enters BACK
DISTANCE setting.
BACK
DISTANCE
10~40 mm
21 mm
Available only when
BACK FEED is
enabled.
BASE
DARKNESS
0~99 (PPLA)
-28~28 (PPLB)
0
Available only in
PPLA and PPLB
printer languages.
ABS.
DARKNESS
0~30
0
To select darkness.
Available only in
PPLZ printer
language.
TRIM.
DARKNESS
-30~30
0
To fine-tune
darkness. Available
only in PPLZ printer
language.
BAUD RATE
(RS232)
600 / 1200 /
2400/ 4800 /
9600 / 19200 /
38400 / 57600 /
115200
9600
Should be as same as
setting of host.
PARITY
(RS232)
NONE
EVEN
ODD
NONE
Should be as same as
setting of host.
LENGTH
(RS232)
8 DATA BITS
7 DATA BITS
8 DATA BITS
Should be as same as
setting of host.
CLEAR FLASH
NO
YES
NO
When “YES” is
selected, all the label
forms, soft fonts, and