Arjo Auralis - Assemble the Auralis system; Auralis 110 mattress overlay assembly

ASSEMBLE THE AURALIS SYSTEM26
Assemble the Auralis system
Figure 28
Figure 29
Auralis 110 mattress overlay
(6 steps)
1.
Select the correct
Auralis mattress overlay size for
the bed. Make sure there are no gaps to entrap a
patient’s head or body. For mattress sizes see
VHFWLRQ³$XUDOLVPDWWUHVVHVDQGVHDWFXVKLRQ
PHDVXUHPHQWV´RQSDJH
2.
Position the
Auralis mattress overlay on top of the
existing
mattress. Make sure that:
• WKH&35UDSLGGHÀDWLRQXQLWLVORFDWHGDWWKH
head end
• the tube-set is located at the foot end
• the cells of the mattress are facing up.
See Figure 28
3.
Secure the Auralis mattress overlay by placing
DQGWLJKWHQLQJWKHIRXU¿[LQJVWUDSVXQGHUWKH
corners of an existing mattress.
See Figure 29
4.
Place the detachable cover over the
Auralis
mattress overlay with the Arjo logo visible and
located at the foot end of the Auralis mattress.
Continue with steps on the next page.
WARNING
To avoid death or serious injury by
entrapment, always select the correct
Auralis mattress size for the bed.
WARNING
To avoid pressure injury, do not use the
Auralis mattress overlay directly on the
bed frame.
WARNING
To avoid falling, make sure the Auralis
mattress overlay is secured to the bed.
CAUTION
To avoid damage to the cells, always use
the Auralis mattress with the protective
top cover.