Arjo Auralis - Auralis seat cushion setup

Figure 40
Figure 41
Figure 42
ASSEMBLE THE AURALIS SYSTEM30
Auralis seat cushion
(7 steps)
1.
CAUTION
To avoid inadequate pressure
redistribution, always use the Auralis
seat cushion in the correct orientation.
CAUTION
Check that there are no sharp objects
on the chair which may puncture the
seat cushion.
Place the Auralis seat cushion on top of the chair
seat. From a position of standing and facing the
front of the chair, make sure:
• the cells are facing up.
• the tube-set appears from the front right corner
of the cushion.
• the cells in the seat cushion are in a horizontal
position across the chair, with the ‘V’ shape
pointing towards the front.
See Figure 40
2.
Secure the Auralis seat cushion to the chair as
described below.
• Open sided chair
$WWDFKWKH¿[LQJVWUDSVDURXQGWKHIUDPHRI
the chair. See Figure 41
• Closed chair with removable seat cushion
$WWDFKWKH¿[LQJVWUDSVFURVVZLVHXQGHUQHDWK
the removable seat cushion. See Figure 42
Continue with the steps on next page
CAUTION
To avoid inadequate pressure
redistribution, do not use the Auralis
seat cushion without a foam cushion
beneath it.