13
6. Carefully push the lift closer to make full lower leg
contact with the Proactive Pad. (See Fig 16)
7. Apply the chassis brakes.
Use the Standing sling for transfer
(14 Steps)
1.
Take each attachment cord in turn and attach to the
sling. (See Fig 17)
2. When both cords are attached correctly, make
adjustments on both cords equally so that any slack
is taken up in each cord and the back section of the
sling supports the patient comfortably and securely.
Warning: Assessment have to be made
whether the patient requires the lower leg
straps, apply if necessary.
Warning: Make sure the cone is pulled
tightly into the cup section. (See Fig 17)
Fig. 17
Fitting the Loop Lock cord attachment system
Cone
‘Cup’ section
How to use the Sara Plus
To Next Page
Loading...
