26
Patient weights
All slings - check the safe working load on the sling label
Component weights
Electrical
kg lb
Safe Working Load 190 420
Maximum weight limit to be lifted or carried (when using the Standing sling) 190 420
Maximum weight limit to be lifted or carried (when using the Transfer/Walking sling for walking
practice only)
190 420
Maximum weight limit to be lifted or carried (when using the Transfer/Walking sling for transfer
operation only)
140 308
Maximum weight limit to be carried (when using the Toilet commode seat and frame) 190 420
kg lb
Sara Plus - non-scale version (complete - without battery) 73.8 162.7
Sara Plus - scale version (complete - without battery) 82.9 182.8
Sara Plus - scale version (complete - with scale and battery) 88 194
Maximum total weight of lift (lift + patient) 278 614
Battery pack 4.9 10.8
Commode seat and frame (option) 4 8.8
Commode pan and holder (option) 1.2 2.6
Foot support 511
Battery type and part number
(Rechargeable - lead acid): SPL3021
Battery capacity: 6 Ah
Battery charger part number:
(Note:** indicates relevant country code)
SPL3024**
Fuse 15 A (Thermal overcurrent circuit breaker)
Fuse – PCBA 20 A
Fuse – battery 30 A
Protection class lift IP 24
Protection class hand control IP X7
Lift nominal voltage: 24 V DC
Operating force of controls < 5 N
Medical Equipment:- type BF protection against electrical shock in accordance with IEC 60601-1
Arjo patient handling products meet the requirements of Electromagnetic Compatibility (EMC) as stated in clause
12.5 of the Medical Devices Directive 93/42/EEC
Although compliant with EMC requirements there is a remote chance that close proximity usage may
affect over-sensitive electrical equipment
The symbol IP n
1
n
2
indicates the degree of ingress protection against solid particles (n
1
) and liquids (n
2
).
2: Protection against solid particle ingress larger than 12.5 mm - fingers or similar objects.
4: Protection against liquid ingress - water splashing against the enclose from any direction shall have no harmful
effect.
Conforms to IEC 60601-1:2012(ed.3.1), ANSI/AAMI ES60601-1:2005 / A2:2010, CAN/CSA-C22.2 No. 60601-
1:08 and ISO 10535:2006.
Technical specification