6
Preparations
Actions before first use (4 steps)
1. Visually check the package for damage. If the
product looks damaged due to freight, contact the
transport agency.
Do NOT use the product.
2. Recycle the packaging according to local
regulations.
3. Read this IFU.
4. Choose a designated area, where this IFU should
be kept and is easily accessible at all times.
5. Unpack the battery pack supplied and fully charge
it, see section “Charge the battery”.
Actions before every use (4 steps)
1. Visually inspect Sara Plus. If any part is damaged -
do NOT use the product.
2. Check the battery level.
3. Make sure the green reset button (situated on the
rear of the mast) is pressed i.
(See Fig 2 on page 7 in section “Parts
Designation”)
4. Check that the system failure lower override knob
is turned fully clockwise and finger tight.
Between patients
Clean and disinfect the product according to section
“Cleaning and Disinfection”.
Sara Plus directions
Left and right
Sara Plus has a left and a right side. (See Fig 1)
Transfer directions
The caregiver must be positioned behind the Sara Plus
during the transfer. (See Fig 1)
Right
Left
Transfer
direction
Fig. 1
To Next Page
Loading...
