Description
9
base of the vessel allow connections to pressure sensors, solenoid valves and
pumps. A vertical overflow tube is included as a safety feature.
The lid of the vessel supports an adjustable height level switch, a differential level
switch and a dip tube for filling or draining the vessel from the top using one of the
pumps or control valves.
Small Process Vessel (Hot Water Tank)
The base unit includes a small clear acrylic process vessel at the rear. This vessel
incorporates an electrical element for heating water. A thermostat and level detector
are incorporated in the vessel to prevent the heater from operating if the water is too
hot or the level in the vessel is too low. These safety devices are fixed and cannot be
used for experimental purposes. The inlet and outlet on the side of the vessel have
quick-release fittings. The vessel lid provides support for the heating/cooling coil.
To Next Page
Loading...