6
Description
Where necessary, refer to the drawings in the Equipment Diagrams section.
Overview
The PCT40 base unit consists of a moulded plinth, two process vessels, pumps and
sensors as well as a mounting point and electrical connections for the optional
PCT41 accessory.
Moulded Plinth
The base plate for the large process vessel is centrally located on a moulded plinth
and secured using thumb nuts.
The plinth includes a drainage channel with a drain valve located at the end of the
channel. The valve can be connected to a suitable drain using the flexible tubing
supplied. The valve should be left open when connected to a drain.
To Next Page
Loading...