7-26 CHP Max™ Headend Optics Platform Chassis, Controllers and Power Supplies Rev D
Figure 7.21
Choose Search and
Installation Options
5. The wizard searches, then installs the driver. When the Found New Hardware Wizard
window indicates that it “has finished installing the software for: USB
Ethernet/RNDIS gadget,” click on the Finish button (refer to Figure 5.22).
Figure 7.22
Completing the
Found New
Hardware Wizard
Window
6. Select Start > Control Panel.
7. When the Control Panel window appears, click on the Network Connections.
8. When the next Network Connections window appears, right- click on Local Area
Connection 2 labeled “Unidentified network, RNDIS/Ethernet Gadget” and select
Properties from the drop-down menu (refer to Figure 5.23).
To Next Page
Loading...
