Rev D System Management Module 2 (SMM-2) 7-37
–9 Indian Ocean
– 10 Pacific Ocean
– 11 Quit without modifying time zone
3. Type the number corresponding to the time zone and press the Enter key to refine
your selection.
Hostname
To set the hostname, proceed as follows:
1. After login, at the admin@192.168.1.1> prompt, type configure and press the Enter
key.
2. At the admin@192.168.1.1% prompt, type set hostname and press the <TAB> or
<SPACE>? key to view the available Hostname command options.
3. Press the Enter key after the Hostname command string is complete with its options.
Password
To set the password, proceed as follows:
1. After login, at the admin@192.168.1.1> prompt, type configure and press the Enter
key.
2. At the admin@192.168.1.1% prompt, type set password and press the <TAB> or
<SPACE>? key to view the available Password command options.
3. Press the Enter key after the Password command string is complete with its options.
System
To set the system, proceed as follows:
1. After login, at the admin@192.168.1.1> prompt, type configure and press the Enter
key.
2. At the admin@192.168.1.1% prompt, type set system and press the <TAB> or
<SPACE>? key to view the available System command options.
3. Press the Enter key after the System command string is complete with its options.
4. At the admin@192.168.1.1% prompt, type commit and press the Enter key.
Add User
To add users, proceed as follows:
1. After login, at the admin@192.168.1.1> prompt, type configure and press the Enter
key.
2. At the admin@192.168.1.1% prompt, type add user and press the <TAB> or
<SPACE>? key to view the available Add User command options.
3. Press the Enter key after the Add User command string is complete with its options.
To Next Page
Loading...
Need help?
General
